915G Motherboard w/Celeron D ?

pabloX · 15-12-2005, 06:22 AM

Hi,

I bought a D915GSN barebones kit (was an old Gateway 7200X which had everything removed) with just the case and the motherboard, and heatsink/fans. Its a BTX motherboard with a huge heatsink and fan. Originally the motherboard came with a Pentium4 LGA775socket chip, and the specs say that it supports the Pentium4, but no mention of a Celeron is made (see first link below).
I have a Celeron D 326 LGA775 chip which I put in, and used the heatsink and fan which came with the BTX case (ATX heatsinks dont fit on a BTX motherboard). However, when I turn the machine on (with 512ram and the Celeron D) a red light blinks twice on the motherboard with two faint click sounds. The fans also blow at full bore.

Could this be a blown motherboard, a blown CPU, bad RAM, or could the Celeron be incompatible with the motherboard? Also, Intel seems to have no documentation on this specific board, where could I find it?

here is all the documentation I could find on the motherboard:

http://support.gateway.com/s/MOTHERB...2129sp24.shtml
http://support.gateway.com/s/PC/7200...008274nv.shtml

Thanks

pelvis_3 · 15-12-2005, 06:23 AM

You might have to contact Gateway to decipher the red light blinks!

Big B · 15-12-2005, 02:12 PM

I'd see and find out if there's any jumper settings you need to adjust. Typically, Celeron's don't always run the same speed FSB as the Pentium's. While motherboards are typically jumper free these days, I don't know if that's the same for the pre-built boxes. I would certainly look into that too, as Celeron's tend to use cores that are derivatives of their Pentium counterparts.

pabloX · 16-12-2005, 05:04 PM

I cannot get any more information about the motherboard from Gateway as I did not purchase the computer from them. They cant help me if I only have the barebones kit. There is minimal documentation on their website so it seems I am outta luck. Perhaps something is not plugged in right. I will double check everything tonight and try playing with any jumpers I see.
Thanks for the help so far!

pabloX · 22-12-2005, 03:32 AM

Ok thanks again guys, but I bought a new mobo and am having another problem!:
http://www.hardwareforums.com/help-m...-beeping-9377/

15-12-2005, 06:22 AM	#1 (permalink) Top
pabloX Geek Trainee Join Date: Dec 2005 Posts: 10 Status: Offline	915G Motherboard w/Celeron D ? Hi, I bought a D915GSN barebones kit (was an old Gateway 7200X which had everything removed) with just the case and the motherboard, and heatsink/fans. Its a BTX motherboard with a huge heatsink and fan. Originally the motherboard came with a Pentium4 LGA775socket chip, and the specs say that it supports the Pentium4, but no mention of a Celeron is made (see first link below). I have a Celeron D 326 LGA775 chip which I put in, and used the heatsink and fan which came with the BTX case (ATX heatsinks dont fit on a BTX motherboard). However, when I turn the machine on (with 512ram and the Celeron D) a red light blinks twice on the motherboard with two faint click sounds. The fans also blow at full bore. Could this be a blown motherboard, a blown CPU, bad RAM, or could the Celeron be incompatible with the motherboard? Also, Intel seems to have no documentation on this specific board, where could I find it? here is all the documentation I could find on the motherboard: http://support.gateway.com/s/MOTHERB...2129sp24.shtml http://support.gateway.com/s/PC/7200...008274nv.shtml Thanks

15-12-2005, 06:23 AM	#2 (permalink) Top
pelvis_3 HWF Member For Life Join Date: Jul 2005 Age: 22 Male Posts: 2,336 Times Helpful: 265 My Mood: Happy Status: Offline My Computer	You might have to contact Gateway to decipher the red light blinks! __________________ Adopt an unanswered thread. \| Who's Online \| vB Code Some people are alive only because it’s illegal to kill them! Support bacteria, it's the only culture some people have!

15-12-2005, 02:12 PM	#3 (permalink) Top
Big B HWF Godfather Join Date: Dec 2001 Age: 28 Male Posts: 9,636 Times Helpful: 585 My Mood: Devilish Status: Offline My Computer	I'd see and find out if there's any jumper settings you need to adjust. Typically, Celeron's don't always run the same speed FSB as the Pentium's. While motherboards are typically jumper free these days, I don't know if that's the same for the pre-built boxes. I would certainly look into that too, as Celeron's tend to use cores that are derivatives of their Pentium counterparts. __________________ Hardware Forums\|HWF Rules\|My DVD's\|PSU FAQ\|HWF Folding Team\|2CPU

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Celeron 2.4 ghz with heatsink!	WWR	Buy / Sell / Trade	3	30-09-2005 11:48 PM
cooling the celeron	shocktherapy	Overclocking & Cooling	15	29-09-2005 04:22 PM
best s370 motherboard that will support celeron 1.2ghz	shocktherapy	CPU, Motherboards and Memory	7	29-09-2005 03:59 AM
celeron motherboard	dan_cope	CPU, Motherboards and Memory	2	09-06-2005 06:18 AM
celeron or p4??	zeus	CPU, Motherboards and Memory	9	10-06-2003 12:31 AM

16-12-2005, 05:04 PM	#4 (permalink) Top
pabloX Geek Trainee Join Date: Dec 2005 Posts: 10 Status: Offline	I cannot get any more information about the motherboard from Gateway as I did not purchase the computer from them. They cant help me if I only have the barebones kit. There is minimal documentation on their website so it seems I am outta luck. Perhaps something is not plugged in right. I will double check everything tonight and try playing with any jumpers I see. Thanks for the help so far!

22-12-2005, 03:32 AM	#5 (permalink) Top
pabloX Geek Trainee Join Date: Dec 2005 Posts: 10 Status: Offline	Ok thanks again guys, but I bought a new mobo and am having another problem!: http://www.hardwareforums.com/help-m...-beeping-9377/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)