Resurrecting the drive

Coldblackice · 11-07-2008, 01:56 AM

Well, my notebook drive bit the dust. I suppose video encoding, watching a movie, with 96 tabs in firefox and 23 tabs in IE, on a hot summer's night on a black leather seat was too much heat to handle. Lappy froze, BSOD, reboot to "no device found". Removed drive and tried in another machine while holding it -- no vibration or sounds from poweron/spinup.

Does this mean that the failure is likely electrical (on the PCB board)? If it was something with the heads or platters, wouldn't I feel or hear some type of vibration? How can I be sure if it's the PCB board without taking it in to a professional?

I'm thinking that I can switch the PCB board with my brother's identical notebook drive to get my data off.

Anti-Trend · 11-07-2008, 12:41 PM

Hi, welcome to HWF.

If I were you, I'd try to identify the failing component on the PCB, since the possibility that every component on the board failed is slim. Plus, you'd be sacrificing your brothers HDD to (maybe, perhaps) have a shot at saving yours... doesn't seem worth the gamble, really. But if it's one shot resister or a melted solder path or something relatively simple like that, you might be able to fix it well enough to get your data off.

Coldblackice · 11-07-2008, 07:10 PM

Could that really damage my brother's PCB board? How?

Also, how would I find out what failed on the PCB board?

Anti-Trend · 11-07-2008, 07:35 PM

Quote:

Originally Posted by Coldblackice

Could that really damage my brother's PCB board? How?

Removing it means you'll have to take it apart to some extent, also exposing it to breakage, ESD, and weakened solder joints. In other words, by messing with it you void the warranty and also risk breaking it.

Quote:

Originally Posted by Coldblackice

Also, how would I find out what failed on the PCB board?

Sometimes it's obvious; little scorch marks, melted solder, runny rosin, etc. Other times you have to break out a voltmeter or even an oscilloscope to figure it out. That's when you really have to weigh how much that data is worth to you.

11-07-2008, 01:56 AM	#1 (permalink) Top
Coldblackice Geek Trainee Join Date: Jul 2008 Posts: 3 Status: Offline	Resurrecting the drive Well, my notebook drive bit the dust. I suppose video encoding, watching a movie, with 96 tabs in firefox and 23 tabs in IE, on a hot summer's night on a black leather seat was too much heat to handle. Lappy froze, BSOD, reboot to "no device found". Removed drive and tried in another machine while holding it -- no vibration or sounds from poweron/spinup. Does this mean that the failure is likely electrical (on the PCB board)? If it was something with the heads or platters, wouldn't I feel or hear some type of vibration? How can I be sure if it's the PCB board without taking it in to a professional? I'm thinking that I can switch the PCB board with my brother's identical notebook drive to get my data off.

11-07-2008, 12:41 PM	#2 (permalink) Top
Anti-Trend Nonconformist Geek Join Date: Oct 2003 Age: 27 Male Posts: 4,772 Times Helpful: 519 Status: Offline My Computer	Hi, welcome to HWF. If I were you, I'd try to identify the failing component on the PCB, since the possibility that every component on the board failed is slim. Plus, you'd be sacrificing your brothers HDD to (maybe, perhaps) have a shot at saving yours... doesn't seem worth the gamble, really. But if it's one shot resister or a melted solder path or something relatively simple like that, you might be able to fix it well enough to get your data off. __________________ See My Desktop \| Try Linux \| Install Linux \| Visit My Server \| Support Hardware Forums \| Easily rip DVDs in Linux

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Connecting another SATA drive and back up my current drive?	gopikrish	Storage Devices	5	14-04-2008 07:05 PM
Fantom Drive External Hard drive	alex2579	Storage Devices	2	04-09-2007 05:11 PM
New asrock mobo not reading hard drive or cd drive	Warmonger41	Storage Devices	13	22-06-2006 08:26 AM
it should be easy to move files from drive to drive	Dusty Mobo	Storage Devices	11	27-04-2006 01:28 AM
crashing after adding old hard drive back up to new hard drive	Don	Storage Devices	2	07-02-2006 08:25 PM

11-07-2008, 07:10 PM	#3 (permalink) Top
Coldblackice Geek Trainee Join Date: Jul 2008 Posts: 3 Status: Offline	Could that really damage my brother's PCB board? How? Also, how would I find out what failed on the PCB board?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)