Hi all, my friend has a computer that every so often reboots for no reason, it did it yesterday (monday) and last thursday. I have the mini dump file but I don't understand it that well and wondered if anyone can make sense of it. Cheers Microsoft ® Windows Debugger Version 6.6.0003.5 Copyright © Microsoft Corporation. All rights reserved. Loading Dump File [C:\WINDOWS\Minidump\Mini062606-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\symbols*Symbol information Executable search path is: Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible Product: WinNt, suite: TerminalServer SingleUserTS Built by: 2600.xpsp_sp2_rtm.040803-2158 Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055ab20 Debug session time: Mon Jun 26 13:40:29.543 2006 (GMT+1) System Uptime: 0 days 4:31:35.606 Loading Kernel Symbols ....................................................................................................................... Loading User Symbols Loading unloaded module list ............... ************************************************************ ******************* * * * Bugcheck Analysis * * * ************************************************************ ******************* Use !analyze -v to get detailed debugging information. BugCheck 100000D1, {0, ff, 1, e1491c68} Probably caused by : ntoskrnl.exe ( nt!SepCreateImpersonationTokenDacl+5d ) Followup: MachineOwner --------- kd> !analyze -v ************************************************************ ******************* * * * Bugcheck Analysis * * * ************************************************************ ******************* DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If kernel debugger is available get stack backtrace. Arguments: Arg1: 00000000, memory referenced Arg2: 000000ff, IRQL Arg3: 00000001, value 0 = read operation, 1 = write operation Arg4: e1491c68, address which referenced memory Debugging Details: ------------------ WRITE_ADDRESS: 00000000 CURRENT_IRQL: ff FAULTING_IP: +ffffffffe1491c68 e1491c68 010500000000 add [00000000],eax CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: INTEL_CPU_MICROCODE_ZERO BUGCHECK_STR: 0xD1 LAST_CONTROL_TRANSFER: from 80581af1 to e1491c68 STACK_TEXT: WARNING: Frame IP not in any known module. Following frames may be wrong. f51c5c64 80581af1 00000001 ffdff120 20206553 0xe1491c68 f51c5c88 805708f5 e1491a90 e2de6da8 f51c5cfc nt!SepCreateImpersonationTokenDacl+0x5d f51c5d30 8056c39b fffffffe 000f01ff 00000001 nt!NtOpenThreadTokenEx+0x100 f51c5d4c 804df06b fffffffe 000f01ff 00000001 nt!NtOpenThreadToken+0x18 f51c5d4c 7c90eb94 fffffffe 000f01ff 00000001 nt!KiFastCallEntry+0xf8 0084fce0 00000000 00000000 00000000 00000000 0x7c90eb94 STACK_COMMAND: kb FOLLOWUP_IP: nt!SepCreateImpersonationTokenDacl+5d 80581af1 8bf8 mov edi,eax FAULTING_SOURCE_CODE: SYMBOL_STACK_INDEX: 1 FOLLOWUP_NAME: MachineOwner SYMBOL_NAME: nt!SepCreateImpersonationTokenDacl+5d MODULE_NAME: nt IMAGE_NAME: ntoskrnl.exe DEBUG_FLR_IMAGE_TIMESTAMP: 41108004 FAILURE_BUCKET_ID: 0xD1_W_nt!SepCreateImpersonationTokenDacl+5d BUCKET_ID: 0xD1_W_nt!SepCreateImpersonationTokenDacl+5d Followup: MachineOwner ---------
IMAGE_NAME: ntoskrnl.exe. That is what crashed. DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1). That is what the error code was. This can be caused by many things such as bad memory, motherboard in addition to software and drivers that are not compatible. Virus scanners have also been known to cause this. Have you made any hardware, software, or driver changes prior to this problem?
Check the event viewer and see what the event code is just before reboot. Run that number through the Microsoft website. I had exactly the samr problem and it just required a simple registry alteration. The next likely candidate is a faulty memory stick, which I have also suffered from in the past (as pelvis_3 mentioned). If you have two memory sticks try booting with one stick at a time installed. It will be apparent if one is not working. As a matter of course unplug and reseat all the internal cards (gfx, sound etc) and all the IDE (or SATA) and power cables. Lastly check the temperatures of the mobo, CPU and gfx card to rule out overheating. Has your friend made any changes to the system recently?