Hey guys, Im quite new to all this so forgive me for sounding dumb :chk: I have a problem with my Radeon 9200(well at least i think it is that). I had turned off the pc and next time i went to turn on, i had no screen output. I've checked all the cables, puled the card out and put it back in and still nothing. I think my card has fried or something else has happened and i just dont know what. Please give me any advice you can as im stuck on my P2 400mhz at mo! Thanks
do you have another card you could try in the slot? If it boots up with another card, then you have a faulty 9200. If not then it is possible you fried something accidentally.
hey, No i tried takin the card outta this p2 but i dint realise the slot is diff, so couldnt try it, im thinkin of buyin a new one as in Jan im upgradin to a P4 3Ghz. Card aint a big thing for me tho as lack of dosh, will get a ok one and upgrade it when i can.
Check the pins on the moniter connection aren't bent as this is a common mistake. also try your p2 system moniter on it to rule ou faulty moniter. i wouldn't just give up just yet and but another i'd see if we can do anything with it first. hope this helps Dave :good:
hey, thanks for the advise but im usin the same screen, i built the athlon and to keep costs down just used scrren from p2, only 15 u c lol. So the screen does work as im usin it now, i just hope it is just the card as im meant to b sellin the mobo and chip to a mate when i get my P4
