CPU Clock problem

Discussion in 'CPU, Motherboards and Memory' started by abhilashdas, Jan 20, 2006.

  1. abhilashdas

    abhilashdas Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    Hi
    I m using a pentium 4 (intel MB) system.
    Since the last week my system says
    "cpu has been changed or cpu clock check failed press f1 to continue"

    Please help me solve this problem.After pressing f1 booting occurs!!!

    Wht could be the problem?

    Nb. I v'nt changed anything
     
    abhilashdas, Jan 20, 2006
    #1
  2. sabashuali

    sabashuali Ani Ma'amin

    Likes Received:
    6
    Trophy Points:
    38
    First place to look is you BIOS.
    You need to make sure that BIOS recognises the CPU correctly and that it is running at the correct speed.

    If all fails you can attempt to reset your CMOS and try to boot again.

    Please post back if you are not sure of the above...
     
    sabashuali, Jan 20, 2006
    #2
  3. megamaced

    megamaced Geek Geek Geek!

    Likes Received:
    0
    Trophy Points:
    36
    You will need to enter your CMOS setup as sabashuali suggested. Have a look around for your CPU settings, and make sure the CPU clock speed is set to AUTO. If this does not correct your problem, you may have to manually enter the correct CPU settings.
    This will mean you need to enter the CPU clock, Bus speed and Voltage
     
    megamaced, Jan 20, 2006
    #3
  4. abhilashdas

    abhilashdas Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    Thank you for your kind reply,
    I ll try that and tell you any progress.
    Thanx
     
    abhilashdas, Jan 21, 2006
    #4

Share This Page