need motherboard manual

Computer Forum CPU, Motherboards and Memory
1

hi I currently baught 4 old used motherboards which are still in pretty decent shape I have had all of them run just fine but the one I just put together isnt working A jumper fell off of it and I cant figure out where to put it.The mother -board is a “IWILL KK266-R ver:1.2” with 512mb pc133 and amd duron 900~mhz socket A processor. down below is a description of the boards and there processors they came with.

1.IWILL KK266-R ver:1.2, 900~mhz
“http://www.ocworkbench.com/hardware/iwill/kk266r/kk266rp1.htm”
2.EPOX EP-7KXA 850~mhz oc 975mhz
“http://www.motherboard.cz/mb/epox/EP-7KXA.htm”
3.ASUS K7M rev:1.04 750~mhz
“http://www.motherboard.cz/mb/asus/K7M.htm”
4.MSI K7-Pro ver:1 650~mhz
“MSI K7-Pro Motherboard Review - PCSTATS.com”

IF you can find manuals for the following boards (mainly the KK266-R) I would be more then satisfied.

Thanks for your feedback.

2

there should be instructions as to the jumper settings written on the M/B (usually in white)

oh! just a quick point, if you can’t get one working: try a BIOS reset (worth doing anyway with used M/B’s)

3

[QUOTE=donkey42]
there should be instructions as to the jumper settings written on the M/B (usually in white)

oh! just a quick point, if you can’t get one working: try a BIOS reset (worth doing anyway with used M/B’s)
[/QUOTE]

I got it to work finaly i looked at the jumper settings on the review page and set them accordingly thanks for your info though:P

4

good xxx