Is this normal? My AMD 1.1 ghz processors voltage reading in cpu-z is varying every second from 1.3 to 1.6 volts. Should´nt this be constant all the time? Recently i had a power failure and overclocking to 2.0 ghz stopped working.The memory also doesn´t work at 200mhz where it is supposed to,now it is in 100 mhz. Could the power supply be damaged? Please help.
Number of CPUs 1
Name AMD Athlon XP
Code name Thoroughbred
Specification AMD Athlon™
Family/Model/Stepping 681
Extended Family/Model 7/8
Package Socket A
Core Stepping B0
Technology 0.13um
Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE
Features
Clock Speed 1102.5 MHz
Clock multiplier x11.0
Front Side Bus Frequency 100.2 MHz
Bus Speed 200.4 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 256 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1102.5 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 64 bits
Chipset
Northbridge nVidia nForce2 Ultra 400 rev. C1
Southbridge nVidia nForce2 MCP-T rev. A3
Graphic Interface AGP
AGP Revision 3.0
AGP Transfert Rate 8x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 512 MBytes
Memory Frequency 100.2 MHz (1:1)
CAS# 2.0
RAS# to CAS# 2
RAS# Precharge 2
Cycle Time (tRAS) 4
Memory SPD
DIMM #3
General
Memory type DDR-SDRAM
Manufacturer (ID) Kingston (7F98000000000000)
Size 512 MBytes
Max bandwidth PC3200 (200 MHz)
Part number K
Serial number 6127DD3B
Manufacturing date Week 11/Year 04
Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Timings table
Frequency (MHz) 166 200
CAS# 2.0 2.5
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS# 7 8