Hi.
Im building a new system, and I need an idea of what sort of psu i’ll need to run stabley without overclocking.
My system is AMD Athlon 64 x2 4800+
DFI Lanparty UT NF4 SLI-DR Expert SKT939
XFX Geforce 7950GT 512mb PCB
1GB DDR400
160GB Sata HDD
And a DVD-RW drive
Any help would be appreciated thanks.
Hi Kryptoxian,
Here’s a good website to where you can calculate the amount of watts your PSU will at least require.
I’d recommend a 500W minimum, but you might want to go for a heavier type if you’ll ever concider upgrading.
Greetings,
Marcus_X
DFI states the minimum requirements for a PSU paired with their motherboard must include the following:
-480W or higher
-24-pin ATX connector
-25A (30A for SLI) on the 12V rail or combination of 12V rails
Some that will do the job:
-Enermax EG 565P-VE (535W)
-Antec TruePower TPII-550 (550W)
-OCZ Powerstream 520
-OCZ GameXtreme 600/700
-FSP AX-500 BlueStorm
-Hiper Type-R 580
-Tagan TG-480-U22
Those will run between $80-120 (US) online in most places.
You can probably get by with less, but, again, the DFI boards do tend to work a lot better when you invest in a good PSU and RAM. Even if it weren’t DFI, skimping on the power supply is a bad idea. In any case, a 500-600W from a quality company (like those who’ve been mentioned) will be plenty, not to mention provide some headroom.
Hey, thanks a lot for the help. I think I’ll go for the Hiper Type-R, just for the little extra buffer on top of the minimum requirements. Thanks again.
-Kryptoxian