Hey all,
I recently noticed after running “Pirform Speccy” that my RAM seems to be operating at possibly the wrong timing’s and bandwidth. I don’t really know what I’m doing with RAM so i’m hoping you guys can shed some light on the subject. 
I’ve tried reading up on the subject but I’m still very unsure if my setting are correct or not?
All my Memory setting’s are set to auto in the Bios.
My computer specifications:
Windows XP SP3
AMD Athlon 64 X2 4000+
XFX 8300 Geforce motherboard (MI-A78U-8309) ([COLOR=“red”]Supports DDR2 1066MHz)
512MB GeForce 8600 GT
625GB Western Digital
Corsair 2GB (2x1GB) DDR2 1066MHz/PC2-8500 XMS2 Dominator Memory CL5(5-5-5-15)
My Ram is currently opperating at:
[COLOR=“blue”]Memory
Type DDR2
Size 2048 MBytes
Channels # Dual
DRAM Frequency 350.0 MHz ([COLOR=“red”]Wont exceed 350 MHz even when in games?)
CAS# Latency (CL) 5 clocks
RAS# to CAS# Delay (tRCD) 5 clocks
RAS# Precharge (tRP) 5 clocks
Cycle Time (tRAS) 18 clocks
Bank Cycle Time (tRС) 24 clocks
Command Rate (CR) 2T
[COLOR=“blue”]SPD
Number Of SPD Modules 2
[COLOR=“blue”]Slot #1
Type DDR2
Size 1024 MBytes
Manufacturer Corsair
Max Bandwidth PC2-6400 (400 MHz) [COLOR=“red”](Is this correct? should it not be 1066mhz or 533mhz?)
Part Number CM2X1024-8500C5D
SPD Ext. EPP
[COLOR=“blue”]EPP #0
Frequency 534.0 MHz
CAS# Latency 5.0
RAS# To CAS# 5
RAS# Precharge 5
tRAS 15
tRC 22
Voltage 2.100 V
[COLOR=“blue”]JEDEC #2
Frequency 400.0 MHz
CAS# Latency 5.0
RAS# To CAS# 5
RAS# Precharge 5
tRAS 18
tRC 23
Voltage 1.800 V
[COLOR=“blue”]JEDEC #1
Frequency 270.3 MHz
CAS# Latency 4.0
RAS# To CAS# 4
RAS# Precharge 4
tRAS 13
tRC 16
Voltage 1.800 V
(The second memory slot, Is exactly the same as slot 1. )
Any help would much appreciate 
Thanks in advance
Luke