Hi Guys,
When i started my system today i got a message
"Pri Hard Disk:S.M.A.R.T status BAD, backup and Replace"
Press F4 to to continue
and 2 error codes…
- 007C
- 0085
hard disk is 3 years old
these are the details:-
[B]
Device Properties:
Driver Description : SAMSUNG SV0802N
Driver Date : 7/1/2001
Driver Version : 5.1.2535.0
Driver Provider : Microsoft
INF File : disk.inf
Disk Device Physical Info:
Manufacturer : Samsung
Hard Disk Family : SpinPoint V80
Form Factor : 3.5"
Formatted Capacity : 80 GB
Disks : 1
Recording Surfaces : 2
Physical Dimensions : 146.05 x 101.6 x 25.4 mm
Max. Weight : 630 g
Average Rotational Latency : 5.56 ms
Rotational Speed : 5400 RPM
Max. Internal Data Rate : 562 Mbit/s
Average Seek : 8.9 ms
Track-To-Track Seek : 0.8 ms
Full Seek : 18 ms
Interface : Ultra-ATA/133
Buffer-to-Host Data Rate : 133 MB/s
Buffer Size : 2 MB
Spin-Up Time : 7 sec
[/B]
i booted my system after pressing F4 and ran Everest S.M.A.R.T test
this is the report
[B]
01 Raw Read Error Rate 51 100 100 30 OK: Value is normal
03 Spin Up Time 0 81 21 3776 OK: Always passes
04 Start/Stop Count 0 95 95 5517 OK: Always passes
05 Reallocated Sector Count 10 5 5 208 Pre-Failure: Imminent loss of data is being predicted
07 Seek Error Rate 51 253 253 0 OK: Value is normal
08 Seek Time Performance 0 253 253 0 OK: Always passes
09 Power-On Time Count 0 100 100 443740 OK: Always passes
0A Spin Retry Count 49 253 253 0 OK: Value is normal
0C Power Cycle Count 0 96 96 4143 OK: Always passes
C2 Temperature 0 157 94 27 OK: Always passes
C3 Hardware ECC Recovered 0 100 100 72143144 OK: Always passes
C4 Reallocation Event Count 0 12 12 193 OK: Always passes
C5 Current Pending Sector Count 10 253 253 0 OK: Value is normal
C6 Off-Line Uncorrectable Sector Count 10 100 100 1 OK: Value is normal
C7 Ultra ATA CRC Error Rate 51 100 100 0 OK: Value is normal
C8 Write Error Rate 51 100 100 435 OK: Value is normal
C9 Soft Read Error Rate 51 100 100 0 OK: Value is normal
[/B]
The only problem it has in S.M.A.R.T test report was
05 Reallocated Sector Count 10 5 5 208 Pre-Failure: Imminent loss of data is being predicted
how can i over come this problem i am not able to boot without pressing F4
system also makes a beep before starting..is my hard disk really going to fail..is there no other option other than replacing the hard disk.
i am a nOOb in Hardware i dont know what is “Reallocated Sector Count”
please help me solve this problem:(
if you need me to give you any other Info please ask me…