Hello, again.
Well, I thought I’d finally cracked it and was going to get my SpeedTouch 330 working in Mandriva 2006. Here’s the script I ran for your thoughts on what might have gone wrong:
Password:
[root@virgin david]# dir
autosave Download speedtouchconf-27-Jun-2006
benefitstrapgermany.doc mgmt.o speedtouchconf-27-Jun-2006.tar.gz
David’s\ Documents Music speedtouch-firmware_0.3012k_all.deb
Desktop ogg tmp
Documents Pictures Video
[root@virgin david]# tar xzvf speedtouchconf-27-Jun-2006.tar.gz
speedtouchconf-27-Jun-2006/
speedtouchconf-27-Jun-2006/po/
speedtouchconf-27-Jun-2006/po/C/
…
Then there are long lines of ‘speedtouchconf-27-Jun-2006’ etc. that just go on repeating themselves for quiet a while before we get to:
…
(c) Steve Parker, 17 Oct 2002 - 2005 (Steve Parker)
speedtouchconf comes with ABSOLUTELY NO WARRANTY; for details type:
./speedtouchconf.sh -gpl
This is free software, and you are welcome to redistribute it
under certain conditions.
See the included file COPYING for more details.
-
* -
speedtouchconf.sh by Steve Parker * -
* - SpeedTouchConf - Home *
- based on speedtouch.sourceforge.net project *
-
*
If you have any problems with this script, mail me
(steve at steve-parker dot org) with the files
/tmp/speedtouch.txt and (possibly) /var/log/messages for diagnosis.
Linux kernel version 2.6 okay.
/home/david/speedtouchconf-27-Jun-2006
-
* -
Please select your ISP Settings * -
*
Country/ISP VPI VCI
Belgium, ? 8 35
Denmark, Orang 8 35
France, Wanadoo 8 35
France, ? 8 67
Italy, ? 8 35
Netherlands, ? 8 48
Netherlands 0 35
Poland (NeoStrada) 0 35
UK, Any 0 38
Austria (AON) 8 48
US, BellSouth 8 35
Singapore Pacificnet 0 100
Please type your VPI VCI numbers (eg, 0 38 for UK)
0 38
Please enter your ISP Login ID (eg [email protected])
[email protected]
Please enter your ISP Password
MY ISP PASSWORD
Settings:
VPI / VCI : 0 / 38
Login : [email protected]
Password : MY PASSWORD
Are these correct? (Y/N)
y
No further user interaction is required.
Configuring SpeedTouch Driver…
Software Configuration - SUCCESS
Building SpeedTouch Driver…
Software Build - SUCCESS
Installing SpeedTouch Driver…
Software Installation - SUCCESS
Creating ppp files in /etc/ppp
You can ignore any insmod hints here…
2.6.12-12mdk
*** Configuration finished. Starting the connection ***
Sun Jul 9 16:08:02 BST 2006
The modem lights should start flashing for approx. 60 seconds…
You might see some messages about USBDEVFS_BULK failed - you can ignore this.
Sun Jul 9 16:08:02 BST 2006
The modem_run command failed (code 235)
modem_run results:
Mutex value not OK
FAILED because of modem_run error 235
[root@virgin speedtouchconf-27-Jun-2006]# Jul 9 16:08:03 virgin hald[3113]: Timed out waiting for hotplug event 944. Rebasing to 974
…
And that’s as far as the script gets. Can anyone think of what might be wrong? I’m assuming I have the right microcode in ’ mgmt.o’ , but I’m not entirely sure. Any thoughts/help on this matter would be appreciated.
Many thanks,
Dave.