Does anyone know how I can change the graphics card size (MBs) within Mandriva 2006? I selected the wrong option when I installed Mandriva (long story) and would like to change it now. I've been into MCC to see how I could do this, but there seems to be no option. I know I could do it if I ran setup again, but I don't want to start from scratch if it can be avoided.
Yes, you need to edit your xorg.conf file: Code: sudo kate /etc/X11/xorg.conf Code: # File generated by XFdrake. # ************************************************** ******************** # Refer to the XF86Config man page for details about the format of # this file. # ************************************************** ******************** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "dri" Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "6 7" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "1024x768 @ 70 Hz" HorizSync 31.5-57.0 VertRefresh 50-70 # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Device" Identifier "device1" VendorName "S3 Inc." BoardName "S3 Savage4" Driver "savage" VideoRam 32768 Option "DPMS" # Option "no_accel" # You may enable this if there are timeouts when starting X EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Virtual 800 600 EndSubsection Subsection "Display" Depth 15 Virtual 800 600 EndSubsection Subsection "Display" Depth 16 Virtual 1024 768 EndSubsection Subsection "Display" Depth 24 Virtual 1024 768 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" EndSection Section "DRI" Mode 0666 EndSection Basically, open up your xorg.conf file and delete everything that's in there. Then copy all of the text above. I've changed your resolution to 1024X768, enabled DRI and inceased the amount of video RAM as well! Once you've copied all of the text into your xorg.conf file, just save it and restart the computer. Should something go wrong, you have a backup which we can restore remember? I think we called it xorg.conf.working.backup
Thanks very much, Mega. So, after I have run sudo kate /etc/X11/xorg.conf the new settings will come up in Kate, and I just save the file and reboot. Now, the only problem is: I ran the command sudo cp /usr/X11/xorg.conf /usr/X11/xorg.conf.working.backup - the command (you kindly provided me with) to backup the xorg file and it came up with this. Please see attached screenshot:
Whoops! :O Let me give you that again! Code: sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.working.backup Yes, the settings will come up in Kate. But you need to delete all of the text in that file, then copy and paste the text in my previous post
Cheers, Mega. I've now backed the file up. I see it's saved itself to its own location. I have also saved a copy to my Home folder. I'll sort things out tomorrow and will post to let you know how it went.
Actually, I managed to do it this evening. Well, all seems much better and I have played a couple of video clips to test things out - no problems there and web pages render faster! Well done! In any event, I have the old settings to revert back to if things go awry. Cheers :beer:
Thats good news Just to make sure though, can you post the output of the following command: Code: glxinfo
Sure, here it is: Code: Password: [root@localhost david]# glxinfo name of display: :0.0 display: :0 screen: 0 direct rendering: No server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig client glx vendor string: SGI client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group OpenGL vendor string: Mesa project: [url=http://www.mesa3d.org]Mesa Home Page[/url] OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 (1.5 Mesa 6.3.1) OpenGL extensions: GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, GL_HP_occlusion_test, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays glu version: 1.3 glu extensions: GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- 0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None 0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None 0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None 0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None 0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None 0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None 0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None 0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None [root@localhost david]#
