(referring to http://www.hardwareforums.com/showthread.php?t=8017)
With the Coolermaster 732 case in mind, what power supply do you think I should get to avoid having to revert my fan like sabashuali had to?
I read on what you lot seemed to think were good brands. As I plan to get a 3.0 or 3.2 (Prescott?) P4, and was gonna stop at 2gb memory and a £100 graphics card, I thought 500 would be more than enough, but want one that is both reliable under heavy use.
I also want it to be modular, as I only intend to have 1 hard drive, 1 dvd drive and a floppy drive. I'm not sure if the Coolermaster 732 draws power for its fans directly from the mobo or from a molex adaptor to connect directly to the PSU.
On my current system, a case fan I'd installed with a blue LED I had connected to the rear fan pins on the mobo and it started off static then flashed strobe constantly. I'd never installed a case fan before and I wasn't sure if the LED ones were supposed to flash like this. However, a friend came round and suggested I use the molex adaptor to power it from the PSU and now it it remains on static. More case clutter, though. Probably the newbiest thing ever to admit I didn't know, but there you go.
I've got this PSU in mind:
Tagan TG530-U15 530W ATX2.01 Easycon SLi Compliant Modular Silent PSU
http://i15.photobucket.com/albums/a353/urb1972/Tagan_EasyCon.jpg
Is that okay, or overkill? :devilsdsd
With the Coolermaster 732 case in mind, what power supply do you think I should get to avoid having to revert my fan like sabashuali had to?
I read on what you lot seemed to think were good brands. As I plan to get a 3.0 or 3.2 (Prescott?) P4, and was gonna stop at 2gb memory and a £100 graphics card, I thought 500 would be more than enough, but want one that is both reliable under heavy use.
I also want it to be modular, as I only intend to have 1 hard drive, 1 dvd drive and a floppy drive. I'm not sure if the Coolermaster 732 draws power for its fans directly from the mobo or from a molex adaptor to connect directly to the PSU.
On my current system, a case fan I'd installed with a blue LED I had connected to the rear fan pins on the mobo and it started off static then flashed strobe constantly. I'd never installed a case fan before and I wasn't sure if the LED ones were supposed to flash like this. However, a friend came round and suggested I use the molex adaptor to power it from the PSU and now it it remains on static. More case clutter, though. Probably the newbiest thing ever to admit I didn't know, but there you go.
I've got this PSU in mind:
Tagan TG530-U15 530W ATX2.01 Easycon SLi Compliant Modular Silent PSU
http://i15.photobucket.com/albums/a353/urb1972/Tagan_EasyCon.jpg
Is that okay, or overkill? :devilsdsd