hi there, I started to build a new computer and I'm almost finished. The problem I'm having is hooking up the front panel audio conectors (the case is a Gamer Sentey Zodiac) to the ASUS P5NSLI motherboard. In the P5NSLI manual shows 2 possible ways of configuration: Azulia Legacy AC'97 PORT1 - GND MIC2_L - AGND PORT1 R - PRESENCE# MIC2_R - NC PORT2 R - SENSE1_RETUR Line out_R - NC SENSE_SEND - (NO PIN) NC - (NO PIN) PORT2 L - SENSE2_RETUR (Does not say anything here) - NC And my case conectors read: 1 w/ 3 pins the other 1 w/ 5 pins MIC - PWR GROUND MIC - IN L-OUT (front left channel audio signal) GROUND R-OUT (front right channel audio signal) L-RET (rear left channel audio signal) R-RET (rear right channel audio signal) would somebody be so kind to help me out with this riddle? I honestly don't understand why there has to be so many configurations for easy access audio, it's ridiculous that not al settings are explained. I've been looking all over the web and no luck. thankyou
