MSI CD-R/RW only recognised as CD-ROM - I'm out of ideas!

T

tomhellman

Geek Trainee
hey guys, I have someones computer whos burner doesnt work. I cant think of any other ideas to get it working. It is an MSI CD-R/RW 48x24x48 and it is only being recognised as a standard cd-rom (in both easy cd creator4.05 and nero). I have also tried my Asus 52x burner in this machine and the same thing happens (only recognised as a cd-rom)
We first thought it just needed a format but we did that and the same problem persisted.

It was originally set as a slave on the primary ide controller, but i have since tried it on the secondary controller, a different ide cable, setting it to cable select and also as a master. the same thing happens!!

I just tried taking out the cmos battery and waiting a bit to put it back in, but that didnt fix it.

and then i put this msi burner in another machine and it works flawlessly!

does anyone have any ideas of how to get it working????? I would be appreciated of any help out there

system is:
550mhz
192mb RAM
windows 98 SE
burner = ATAPI CD-RW CW4801


Cheers,

Tommo.
 
In the system where the burner works, what is the os and are you using the same burning programs (same versions) ?
 
Make sure you've got the latest updates for either program, since they add support for newer drives.
 
The system it works on has winme installed and I had nero on it, I am going to put easy cd on it and try that

i downloaded all the updates for easy cd and direct cd
 
You might wanna look for some drivers.

You usualy don't need special drivers for ide drives to work, but since it works in Me and not in 98SE (Me being newer), that could be the issue.
 
yeah i thought of that but there wasnt any drivers that were easy to find. and plus, it used to work on 98se fine i dont know what they did to it to make it stop working. but whatever they did its more detaile than just being able to format
 
You never need drivers for an IDE drive which is internal, unless you're running a DOS-based OS such as Win3.x. By the sound of your current burning software, it's not much newer than the OS it's running on. Big B is right in saying that updates to the burning software add support for newer burners. I'd stake a fair amount of cash on the assumption that your burning software is simply too old. Download the *latest* version of Nero and give that a whirl.

All the best,
-AT
 
I'm downloading nero 6 so we'll give that a go. but i had all the updates for easy cd creator even though it was only 4.05 i still woulda thought it could recognise an msi 48x24x48 burner.
i'll get back to yous in a few minutes
 
tomhellman said:
...i had all the updates for easy cd creator even though it was only 4.05 i still woulda thought it could recognise an msi 48x24x48 burner...
Click to expand...
Well, that drive was made within the last year or so, and Easy CD Creator 4.05 (the latest update to version 4.0) was released in June of 2001. I think it's fair to say the two are not compatible. :)
 
Oh and btw, I would stick to nero instead of Roxio.

I don't have much experience in burning cds but I can tell without a doubt that nero is more compatible and causes less problems in Windows (none actually).

I had all kinds of problems getting my cd-rw (media) recognized in Easy CD Creator but nero had no problem at all.
 
You must log in or register to reply here.
Back
Top