Hi, Plaese can anybody help Just got 2 gig of ram put then both in nothing happened, started up pc and left with a blank screen. Took 1 gig out put back in 512mb and the computer started. the bios recognised the 512mb and the 1 gig but total memory in the bios and in windows xp home is still 512 mb Used a wizard of the internet and you can see that the 1 gig has been recognised Currently installed memory: 1024 MB DDR PC2700 512 MB DDR PC2700 EMPTY Each memory slot can hold DDR PC3200,DDR PC2700,DDR PC4000 with a maximum of 1GB per slot.* *Not to exceed manufacturer supported memory. Maximum Memory Capacity: 2048MB Currently Installed Memory: 1536 MB Available Memory Slots: 1 Number of Banks: 2 Dual Channel Support: No CPU Manufacturer: GenuineIntel CPU Family: Intel(R) Pentium(R) 4 CPU 3.06GHz Model 2, Stepping 7 CPU Speed: 3066 MHz Thanks joh
What motherboard have you got? Some boards only allow certain combinations of RAM speeds, modules on the sticks etc. Make sure your board can support 2gb of DDR333 and not just DDR266 for example. Make sure it supports more than one stick if you are using a DIMM with 32 DDR chips etc. If you find what board you have then it should be simple to find out what it supports. Try PCWizard if you dont know what you have.
I Have an Asrock P4VM800 PCwizard says the ram are both the same just that they are differnet sizes and one is single bank and the other double. Does this help Thanks Joh
