AXP
Geek Trainee
I am building a PC for a friend out of mostly my parts. Basically, I had Windows XP home installed, and all the nessarry drivers. All was good. Then I restarted the computer and found that the mouse was not responding. No problem, right? Just unplug it and put it back in. Nope. I unpluged it and the PC restarted. No display, nothing, just fans running/hard drive spinning up. Then after about 10 seconds, it turns off by itself. Then I wait a bit, confused, then turn it back on. No display, just fans turning/hard drive spinning up, then it turns off by itself again. It is in the same state right now. Another thing I noticed is the hard drive and power leds on the case no longer light up at all (the connectors are plugged in correctly and where working before).
What I've tried:
-Reset CMOS many times
-Unplugged all drives (CD/DVD/HDs...)
-Reinstalled CPU and memory
-Tried a different working video card
-Tried a different working RAM stick
-Took the A-XP 3200 and put it in different system and it powered up perfectly.
Specs:
Biostar M7NCD
Athlon XP 3200
Ultra 512MB PC3200
FX 5200 128MB
Ultra X-Connect 500W PSU
Did this motherboard just decide to die or what? :(
What I've tried:
-Reset CMOS many times
-Unplugged all drives (CD/DVD/HDs...)
-Reinstalled CPU and memory
-Tried a different working video card
-Tried a different working RAM stick
-Took the A-XP 3200 and put it in different system and it powered up perfectly.
Specs:
Biostar M7NCD
Athlon XP 3200
Ultra 512MB PC3200
FX 5200 128MB
Ultra X-Connect 500W PSU
Did this motherboard just decide to die or what? :(