Very high temperatures

Discussion in 'Overclocking & Cooling' started by Coolerexpert88, Jul 29, 2006.

  1. Coolerexpert88

    Coolerexpert88 Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    For a few days from bow my system hits very high temperatures making the games stop and the system reset.the most high temperature i got was 89 Celsius!:eek:hah:,i even installed a CoolerMaster UV Series chassis fan but nothing.
    What should i do?

    My System:
    Pentium 4 3.0 Ghz
    ASUS EAX1600PRO DDR2 512MB
    1 GB Ram
    AsRock Dual Bus Motherboard
     
  2. Big B

    Big B HWF Godfather

    Likes Received:
    145
    Trophy Points:
    63
    Make sure that your CPU's fan is running and that it's seated properly.
     
  3. Coolerexpert88

    Coolerexpert88 Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    The CPU fan is running properly,hmmm,maybe the problem is the heat in italy,but the thing is that the games exit and the computer reboots
     
  4. Big B

    Big B HWF Godfather

    Likes Received:
    145
    Trophy Points:
    63
    While, yes, ambient temps do affect CPU temperature, 98*C is way out of spec. Something tells me that if the fan's working, the CPU heatsink either isn't enough or not making proper contact. If you're using the stock Intel heatsink, that's pretty good and should be more than sufficient.

    Remove the CPU heatsink, clean off the thermal paste completely with some isopropyl alcohol and then apply a paper thin layer of thermal paste. Applying more than a thin amount of paste will act as a heat insulator rather than assist tranferring the heat.
     
  5. Willz

    Willz MiCrO$oFt $uK$ :D

    Likes Received:
    36
    Trophy Points:
    48
    with my Pentium 4 3ghz, my idle temperature was 52 degrees and in games it got to 80degrees, i even installed a new fan (Arctic Freezer 4) and the temps were exatly the same :s, and that cant be right, either the CPU is faulty, Maybe faulty temp sensors?
     
  6. Coolerexpert88

    Coolerexpert88 Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    I don't know,:eek:hah: removing the heatsink i constated that there was no thermal paste maybe that's the problem
     
  7. zeus

    zeus out of date

    Likes Received:
    0
    Trophy Points:
    36
    If I read that right (I dont know what "constated " means) it will definatly be your problem!
     
  8. Coolerexpert88

    Coolerexpert88 Geek Trainee

    Likes Received:
    0
    Trophy Points:
    0
    Then i need to put Thermal paste under the CPU?
     
  9. max12590

    max12590 Masterful Geek

    Likes Received:
    51
    Trophy Points:
    0
    Under the CPU? You must mean under the heatsink. Put a very thin layer of thermal paste on the die (big shiny part) of the CPU. Then put the heatsink back on.
     
  10. Big B

    Big B HWF Godfather

    Likes Received:
    145
    Trophy Points:
    63
    Also, the reason you have a thin layer is to fill in the micro gaps on the surfaces which facilitate a better transfer of heat. Globbing it on will cause the thermal paste to act like an insulator for the heat. Obviously, this is the exact opposite of the desired effect.
     

Share This Page