hello, little help plz? sounds like your wndows install is corrupt. If presume your OS is windows XP? judging from your specs. you can repair...
disconnect the power switch from the motherboards control panel and use a flat head screw driver to short the two power switch pins. could well be...
disconnect the reset switch from the motherboards control panel. Also touch the NB and SB heatsinks see if your having any heat issues. also try...
have you tried reset cmos? or loading bios defaults? if not you could have some kind of failed or failing hardware attached to a controller and...
5770 will require more than 450w, most likely stability issues down to such low power psu. Also what is the brand of the 450w psu that you tried...
Hi have you tried reset cmos? if you can't find the jumpers just flick the battery out with a flathead screwdriver. Have you tried using the other...
Hi the OS is VMware Esxi 4. The problem has been resolved. The problem was the onboard sas raid controller was conflicting with the Pci-express x4...
Hi all, Just built a xeon server tower all is well but problems with ESXI 4 and LSI (3ware) 9600se Hardware raid controller. I first of all...
yea your correct, my bad didnt relise he didnt have a raid in the first place.
hi, you tried setting a static ip on the nic that doesn't detect the network connection? you tried a different port on the switch?
wouldn't bother with the Asus motherboard instafail. best off investing in an evga motherboard or gagabyte. pref with onboard raid ich10r get...
I wouldn't get any there are all out of date. best of saving more cash and investing in ati 5850 or 5870 dx11
it's backwards compatible to work with pci-express x16 1.0 but all it means it has a lower bus cap of 2GB/s knows as pci-express x8 mode. if...
never heard of it, what your best off doin is having one server tower, having a raid configuration raid 1, raid 5 or raid 10 so you will not have...
sounds like graphics card to me, if it was power supply unit your machine would most likely shutdown completely. I've had a similar problem before...
hi, first off increase your page file, your machine will page file like mad with that amount of ram capacity, most likely the reason why it's...
have you benched your hard drives using hd tune? have you ran prime95 for stability issues? I would also try disabling ati poller service in...
stay away from asus they are instafail. also you the motherboard socket needed for your selected cpu is AM3 + but what model cpu are you using?...
Hi sorry for the late reply been busy. I just had a look at the spec's of your cpu and it system bus is 800mhz. apparently you can get the cpu to...
disconnect the power switch from the motherboards controler panel and use a flat head screw driver to short the two power switch pins. Also check...
Separate names with a comma.
