Average CPU Temperature

blade

GEEK 2.0
What's an average CPU temperature?

Mines always from 70-82 degrees celsius; is that normal
 
For a P4? No, that's way to hot! You should not get it above 60 degrees. But if the CPU would overheat, it will automatically shut down,
 
What temperature program are you using?

If it is running the hot (Might be a mistake, your Mobo should have automatically shutdown if It got that high to protect itself) - I would suggest getting a can of air and blowing your whole case out, paying special attention to your fans and heatsync. I would also take a look in BIOS for your CPU and Motherboard temps, if your Motherboard supports it, You will get more accurate readings then some other software temperature monitors.

I would also look at your CPU temps according to SpeedFan, Thats what I use on my ASROCK board, and the temps are very close to what my temps read in BIOS.
 
that where i got the temperature - from my bios, ill take some photos of my PC later, in hopes for how to improve a cooler system flow
 
At stock speeds and idle, you should be in the upper 40's. The later P4 cores were known to run pretty warm, but 70-80*C is definitely too hot for them. You may want to make check to see if the BIOS offers any sort of fan speed adjustment based on temperature and make sure it's enabled.
 
heres the pics of my comp.

i think im going to get a slot fan and hard drive fan to cool things down
 

Attachments

  • 50620001.jpg
    50620001.jpg
    260.1 KB · Views: 150
  • 50620002.jpg
    50620002.jpg
    216.9 KB · Views: 158
  • 50620004.jpg
    50620004.jpg
    244.4 KB · Views: 153
  • 50620005.jpg
    50620005.jpg
    231.3 KB · Views: 155
...and the software reads the BIOS settings from your OS.

Yeah, dust that sucker out for starters. Secondly, some wire management would do wonders for air flow. Zip-ties are a very inexpensive means of tying up unused wires and holding the rest out of the way.
 
Back
Top