My PSU decent/needs upgrade

M

mut

Geek Trainee
Is my PSU decent or does it need upgrading, I dont know the brand: Chieftec and I dont want my PSU blowing up and taking my components with it.

It's powering the following:

Pentium D 805 @ 3.7Ghz
1GB DDR2-667 RAM
ASUS P5LD2 Deluxe
NVIDIA 6600GT 256MB GDDR3
250GB SATA HDD

My PSU specs are as follows:

PSU: Chieftec 450W
+5V - 28A
+3.3V - 30A
+12V1 - 14A
+12V2 - 15A
-12V - 0.5A
-5Vsb - 2A
 
mut said:
Is my PSU decent or does it need upgrading, I dont know the brand: Chieftec and I dont want my PSU blowing up and taking my components with it.
Click to expand...
i've never heard of that brand either, so, i wouldn't like to comment on it, if the PSU is a generic PSU (came with your computers case then its probably not good although the specs seem ok but if i were you i'd be a lot happier with a PSU i know is good (like an Antec TP 2) check out Big B's PSU Sticky you will find it usefull
 
From what I can gather, it's an average PSU. It's nothing spectacular, but on the flip-side, it's not something like an Ultra X-Connect. If things are working fine, I'd leave it alone. However, if you upgrade your CPU and/or video card, you probably want to jump to something a little more heavy duty. Most PSU's are rebadged units made by a one company. I'll have to do some research, but a lot of companies take a power supply from a certain company, rebadge it and sell it as their own. You may have noticed I've added XClio units to the list. They're basically the same PSU's that Antec has, which are made by ChannelWell Technology. From what I understand, Chieftech PSU's are made by Wintech, which were the base of the early Ultra X-Connects. The X-Connects went south when Ultra switched to Youngyear models, which had poor soldering jobs among other issues.

Once I'm able to corroborate some info, I'll add some of this info in the PSU Sticky.
 
Thanks for the help. I think ill stick with this one untill i really need to upgrade.
 
You must log in or register to reply here.
Back
Top